¿Qué falla cubre el recall NHTSA 19V127000 del Altec Digger Derrick 2008?

Altec Industries, Inc (Altec) está llamando a revisión certain 2003-2019 Altec DL/DM, DL/DMB, and DC Digger Derrick vehicles.

¿Qué falla cubre el recall NHTSA 13V141000 del Altec Digger Derrick 2008?

Altec Industries, Inc (Altec) está llamando a revisión certain model year 2007-2012 DC, and DL/DM Digger Derrick utility trucks, equipped with boom tip winches using Tulsa Winch Group (formerly Gear Products) winch drums.

5 Recalls — Altec Digger Derrick 2008

Consultando bases de datos de seguridad automotriz...

🟢 Preventivo
Emitido el 14 de sept de 2023NHTSA #23V636000
Altec Industries, Inc.
Tren Motriz
Ver detalles del recall
Descripción de la FallaEN
Altec Industries, Inc. (Altec) is recalling certain 2004-2023 DL42 and DL45 Digger Derricks. The incorrect hydraulic load holding valve may have been installed, which can cause the winch to lower uncontrollably and the load to fall.
ConsecuenciasEN
An uncontrolled load falling increases the risk of injury to personnel or others nearby.
SoluciónEN
Altec will replace the load holding valve, free of charge. Owner notification letters are expected to be mailed October 6, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is MAB 3113.
Ver todos los modelos afectados por esta campaña
Registrado el 22 de abril de 2026
🟡 Riesgo Importante
Emitido el 9 de nov de 2018NHTSA #18V791000
Altec Industries, Inc.
Eléctrico Eléctrico
Ver detalles del recall
Descripción de la FallaEN
Altec Industries, Inc. (Altec) is recalling certain 2008-2018 Altec AC18, AC23, AC26, AC30 and AC38 Cranes and D2B, D3A, D4A/B, DL42B, DT65 and DT80 Digger Derrick vehicles. The wiring on the 12V circuit from the chassis battery to the Power Distribution Module (PDM) may be insufficiently sized.
ConsecuenciasEN
The insufficiently sized wire may overheat, increasing the risk of fire.
SoluciónEN
Altec will notify owners, and dealers will replace the wiring to the PDM, with a larger wire and/or replace the circuit breaker, free of charge. The recall began January 9, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 703.
Ver todos los modelos afectados por esta campaña
Registrado el 22 de abril de 2026
🟢 Preventivo
Emitido el 27 de feb de 2019NHTSA #19V127000
Altec Industries, Inc (Altec) está llamando a revisión certain 2003-2019 Altec DL/DM, DL/DMB, and DC Digger Derrick vehicles.
Dirección
Ver detalles del recall
Descripción de la FallaEN
Altec Industries, Inc (Altec) is recalling certain 2003-2019 Altec DL/DM, DL/DMB, and DC Digger Derrick vehicles. The pedestal tube welds may crack over time.
ConsecuenciasEN
Unrepaired cracks may result in failure of the pedestal and uncontrolled movement increasing the risk of injury.
SoluciónEN
Altec will notify owners and will provide repairs as necessary and a reinforcing kit. The recall began April 3, 2019. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 713.
Ver todos los modelos afectados por esta campaña
Registrado el 22 de abril de 2026
🟢 Preventivo
Emitido el 15 de ago de 2014NHTSA #14V503000
Altec Industries, Inc.
General Eléctrico
Ver detalles del recall
Descripción de la FallaEN
Altec Industries, Inc. (Altec) is recalling certain model year 2000-2013 Aerial Device and Digger Derrick trucks, equipped with Sure Power Battery Equalizers containing a particular epoxy sealing, aka 'potting', compound. The specific potting compound used in the subject products for insulation was found to be capable of conducting electricity after being exposed to heat.
ConsecuenciasEN
Once electrically conductive, the material is capable of melting and burning, increasing the risk of a fire.
SoluciónEN
Altec will notify owners, and dealers will replace any affected battery equalizer, free of charge. The recall is expected to begin in September 2014. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 603.
Ver todos los modelos afectados por esta campaña
Registrado el 22 de abril de 2026
🟢 Preventivo
Emitido el 11 de abr de 2013NHTSA #13V141000
Altec Industries, Inc (Altec) está llamando a revisión certain model year 2007-2012 DC, and DL/DM Digger Derrick utility trucks, equipped with boom tip winches using Tulsa Winch Group (formerly Gear Products) winch drums.
General
Ver detalles del recall
Descripción de la FallaEN
Altec Industries, Inc (Altec) is recalling certain model year 2007-2012 DC, and DL/DM Digger Derrick utility trucks, equipped with boom tip winches using Tulsa Winch Group (formerly Gear Products) winch drums. In the affected vehicles, the winch drum could deform or fracture.
ConsecuenciasEN
If the winch fails while in use, it could cause personal injury.
SoluciónEN
Altec will notify owners and dealers will replace the winch drum, free of charge. The recall began on June 10, 2013. Altec's recall campaign number is CSN 574.
Ver todos los modelos afectados por esta campaña
Registrado el 22 de abril de 2026

5 Recalls — Altec Digger Derrick 2008 (General)

Análisis de Riesgo: Fallas en General

Recibí alertas para este vehículo

Alertas de recall para altec digger-derrick 2008

Panel de Seguridad

Altec Industries, Inc.

Descripción de la FallaEN

ConsecuenciasEN

SoluciónEN

Altec Industries, Inc.

Descripción de la FallaEN

ConsecuenciasEN

SoluciónEN

Altec Industries, Inc (Altec) está llamando a revisión certain 2003-2019 Altec DL/DM, DL/DMB, and DC Digger Derrick vehicles.

Descripción de la FallaEN

ConsecuenciasEN

SoluciónEN

Altec Industries, Inc.

Descripción de la FallaEN

ConsecuenciasEN

SoluciónEN

Altec Industries, Inc (Altec) está llamando a revisión certain model year 2007-2012 DC, and DL/DM Digger Derrick utility trucks, equipped with boom tip winches using Tulsa Winch Group (formerly Gear Products) winch drums.

Descripción de la FallaEN

ConsecuenciasEN

SoluciónEN

No hay alertas relacionadas